Evolution of our traditional “J” hanger mod.2088.

Optional fixation with screws (not included), which remain concealed behind the decorative front cover.

Maximum weight supported: 2,5 kg.

Patented product, designed and developed entirely by Inofix (Reg.C.D.Nº 015034071).​

Suitable for halls, bedrooms or any other rooms. Ideal for hanging any type of garment or accessories.

Adhesive bonding

Apply to smooth surfaces free from dust and grease. Fixing to porous surfaces or LSE coatings may reduce the adhesive performance.

Clean the installation spot with alcohol.

Peel off the protective paper from the adhesive.

Affix and press the hook onto the surface.

Maximum adhesiveness will be achieved after 24 hours.

Fixation with screws

Use a screwdriver to remove the hook cover.

Using the hook as a template, mark the desired position on the surface with a pencil through the screw holes.

Drill and place the fixing plugs, screw the hook in and place back the cover.

It is recommended to wait 24 hours before use for the adhesive to achieve maximum performance.