Rubber shock absorbing door stop.

Suitable for floors or walls.

Screw fixation (screws included).

Dampens the impact of the door, protecting the wall.

For use on interior and exterior doors.

Mark the spot where to place the door stop and drill a hole with a 6 mm drill bit.

Insert the fixing plug and screw the door stop in.

If placed on the floor, fixing the door stop as far away from the hinges as possible is recommended.

It is advisable to fasten the door stop in the joints between floorings, without drilling them, so that if you decide to remove the door stop in the future, you can easily cover the hole with putty.