Door stop with PVC shock absorber.

Screw fixation.

Dampens the impact of the door, protecting the wall.

Suitable for interior doors.

Use a screwdriver to separate the door stop from the base.

Mark the installation spot.

Drill a hole with a 6 mm bit and insert the fixing plug.

Screw the base in and place the door stop.

It is recommended that the door stop be set as far away from the hinges as possible.

It is advisable to fasten the door stop in the joints between floorings, without drilling them, so that if you decide to remove the door stop in the future, you can easily cover the hole with putty.