Coverstrips to cover differences in level between floorings of up to 5 mm. They cover up to a maximum spacing between floorings of 15 mm.

Humidity and wear resistant.

Strong structure.

Available sizes: 985 mm and 820 mm.

Adhesive or screw-in covers available.

Profile of the transition between floorings at different levels.

Adhesive bonding

Clean the surface where you will be installing the coverstrips thoroughly. Insist on spaces where dust may remain.

Place the coverstrips between the two floorings, making sure they are straight and aligned. If the coverstrips are longer than the desired length, mark the length desired and cut with a small hacksaw.

Peel off the protective paper from the adhesive and stick it tightly onto the desired position.

Fixation with screws

Place the coverstrips between the two floorings, making sure they are straight and aligned. If the coverstrips are longer than the desired length, mark the length desired and cut with a small hacksaw.

With the coverstrips in the desired place and aided by the screw holes, mark with a pencil on the flooring the spots where to make the holes, place the plugs and fix the coverstrips with the supplied screws.

In case of application on uneven flooring and whenever the coverstrips do not come into full contact with the surface, you may apply some silicone to prevent the accumulation of dirt and dust.